Window Washing Cleaning Services

Proper up keep

This summer don’t forget your tune up after that long winter. Spring is Here and we are all gearing up at Sac Valley Clean for another wonderful summer. Double checking all parts of your pressure washer and equipment is crucial. 

  • Air Filter
  • Replace Gas
  • Check Hoses
  • Check carb

Go over Manuel fully to check recommended specifications.






Take care of your Pressure Washer.

 This Winter

  1. Turn machine switch to STOP position.
  2. Turn off water supply. Detach and drain water supply hose.
  3. Detach and drain high pressure hose and pressure washer trigger gun.
  4. Have approximately 1 Gallon of a 50/50 auto antifreeze solution ready.
  5. Turn machine switch to MOTOR ON and pour antifreeze solution into float tank.
  6. Immerse detergent suction hose in a separate container filled with anti-freeze solution. Set detergent valve to a high position if unit has a control setting. This will only protect the detergent line freezing, not the entire pump.
  7. Allow antifreeze solution to emerge at machine outlet. Protection is now complete.
  8. Turn machine switch to STOP position.

Drain any gas that may be in the tank. Gas can gum up over time and obstruct the lines. Use a fuel stabilizer to store your gas in a gas can.

Launch Project

Window Washing Cleaning Services

Window Washing Cleaning Services


It’s very important to wear protective safety gear and follow safety tips when using one of these very powerful tools.

Window Washing Cleaning Services


Knowing how to properly use your pressure washer is the first safety precaution to take before using it.

Window Washing Cleaning Services


Protect the pistons of your pressure washer and seal them from damage
Uses a unique anti-freeze and lubricant formula
For before extended storage and prior to startup the following season to keep your pump running on full blast
4-ounce bottle can be used with most brands of pressure washers
Genuine OEM replacement par.

Window Washing Cleaning Services


is the use of high-pressure water spray to remove loose paint, mold, grime, dust, mud, chewing gum and dirt from surfaces and objects such as buildings, vehicles and concrete surfaces. The volume of a mechanical pressure washer is expressed in gallons or litres per minute, often designed into the pump and not variable. The pressure, expressed in pounds per square inch,

Pressure washers use a gas engine or an electric motor, a pump, and a concentrating nozzle to boost water pressure from a water source.

Although a small amount of ER visits actually  led to additional hospitalization Pressure washing related injury can be serious. 

Succeed Today

Active Installs